|
Finally, no piles of chips!
when I bought my Delta 22-540 planer several years ago, there was no way of catching the piles of chips and dust as they were made. A couple of years later there still was no dust collection accessory available so I quit looking. I happened to do a web search a few weeks back just on a whim and there it was.
I couldn't be happier with this product. It does the job well. It seals where it needs to, a large funnel shape helps chips flow to dust collection port, and installation took all of...
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
02/19/2008
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
100%
(5 of 5) Users Found This Review Helpful
|
|
|
|
PERFECT!
If you have this planer you need this chip collector. It works, it fits, It's easy to install, you'll get a better cut without the chips flying all around getting caught between the knife and your lumber. It's cheap. I have had this planner for 10 years I should have got the hood sooner. You will need an adapter if your not set-up for four inch collection.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
06/23/2006
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
80%
(4 of 5) Users Found This Review Helpful
|
|
|
|
should come with the planer
this is the best thing to hit a planer , you will wear out a shop vac trying to keep up with the chips and you still wont get it all .but this makes that easy and you dont miss any dust plus i think it helps to cool your blades which makes them last longer . it is no doubt a good addition to anyones delta planer.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
11/22/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
100%
(3 of 3) Users Found This Review Helpful
|
|
|
|
Totally worth it
My only "gripe" is that Delta should make this standard equipment on the TP305 instead of having to buy it as an add-on.
That said, the product is as easy as it gets to put on. A few screws and the old one is off and the new one is on. It fits 4" dust collection hose perfectly. I hooked the new planer hood up to my Habour Freight 1HP dust collector. I planed some white oak and with the DC hooked up, nothing was left behind. The new DC adapter for my planer worked perfectly.
...
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
09/09/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
100%
(3 of 3) Users Found This Review Helpful
|
|
|
|
It REally Works
Amazon Verified Purchase(What's this?) Yes, I could not believe it, but this darn thing picks up about 90% of the sawdust from my Delta planer. I had to use some duct tape to attack the connector to my 2" vacuum hose, but even that works great. The Delta people need to include this when purchasing their planers.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
02/01/2008
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
100%
(2 of 2) Users Found This Review Helpful
|
|
|
|
Planer gift
We gave this gift to our son for his birthday, and he was very happy. He was even happier after using it. It works very well, and does a great job.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
01/03/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
66%
(2 of 3) Users Found This Review Helpful
|
|
|
|
So-so Delta dust collector
Pros: 1. Great concept. 2. Compact.
Cons: 1. Difficult installation--screw location poor, thanks to Delta. Dust port centered above planer outfeed. ..tough for any dust collection system other than overhead.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
12/10/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
100%
(1 of 1) Users Found This Review Helpful
|
|
|
|
Great for TP-305
Works very well with my planer & shop-vac w/ 1.25" hose (with reducers of course!). Very little is missed by this set up.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
07/07/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
50%
(1 of 2) Users Found This Review Helpful
|
|
|
|
Delta Tp305
This worked great on a Delta Tp305 12-1/2 Planer using a Jet dust collector. Only had a few chips left over.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
05/12/2007
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
100%
(1 of 1) Users Found This Review Helpful
|
|
|
|
chrisrefill.com
Made out of plastic and fits very well to planer. I would choose this one over the metal one with different part numbers any day. I also bought a adapter for a 1.5 shop vac and this does not fit to the 5" outlet because both parts are 5" so I duct tape the adapter on the 5" outlet on the planer connect.
[Unknown If You Dare (50359) review can be read at Amazon.com]
|
|
Reviewed by:
|
|
|
Review Date:
|
02/17/2006
|
|
User Location:
|
|
|
Review From:
|
User Review
|
|
|
|
50%
(1 of 2) Users Found This Review Helpful
|